About:
The Jen-Ken Vertical Air Bath EDC allows most culinary blades to be distressed (normalized), hardened, and tempered with little to no warping or distortion in the kiln. This kiln size is good for blades up to 11” long with tangs up to 6” long.
Best Used For:
- Glass Under 1500
- Casting Under 1700
- Lampworking Under 1150
- Ceramics Under 2000
- Pottery Under 2000
- Knives Under 2100
- Heat Treating Under 2100
Detailed Information:
| Inside Width | 6″x6″ |
| Depth | 11″ |
| Top / Side Firing | Side |
| Volts | 120V |
| Amps | 15A |
| Watts | 120W |
| Plug | 6-30 |
| Max Temp | 2200F |
| Cubic Feet | .23 cuft |
| Weight | 50 lbs. |
Outside Features:
- Cool Touch Handle
- Stand to the Side to Open
- Easy to Open to Retrieve the Blade
- Kill Switch to De-Energize Coils when the Lid is opened
- Space saving, Small Foot Print design
- Three Controllers: Three Button, 12 Button, and TAP Con-troller with preloaded blade programs.
- Optional Solid State Relay for Longest Life with Safety Relay System:
- Relays that Stay on Entire Time as a Safety and the Other Cycles and Does the Work of Heating and Running your Program.
- Large Side Handles for easy Moving.
- Sectional design for easy coil maintenance.
- Casters so Kiln can be rolled into place for use and out of the way as needed.
Inside Features:
- Round Design to Eliminates hot and cold spots
- Holes in lid to allow smoke and fumes to leave the kiln while heating.
- Ceramic Rods to Support the Blades Three ways. On High Temp Alloy Metal Pins, or turn sideways between the rods, or on special spring grip supports.
- Holds 10 –12 blades
- Two Chambers.
- Upper Chamber to Keep Tangs hot and with heating coils help recoup temperature after opening.
- Center Baffle to retain heat and support the blades in free air.
- Lower Chamber to Heat Blades with a Full 360° of Radiant Heat for the most even heating possible in air.
- External Thermocouple for easy access and replacement.
- 120 volt Power for Faster Heat Up and Recovery
Reviews
There are no reviews yet.